Effectiveness of non-operative approaches in active enamel carious lesions: a retrospective longitudinal study.

The aim of the study was to investigate the effectiveness of non-invasive and micro-invasive treatments in active enamel carious lesions in high-caries-risk children. Clinical records of children treated in a dental school setting were retrospectively screened for active enamel carious lesions treated non-invasively (topical fluoride applications, oral hygiene instruction, or dietary guidance) or micro-invasively (sealant). The control of active carious lesions was set as the main outcome established by the combination of inactivation and non-progression of the lesions based on Nyvad and ICDAS criteria, respectively. Individual and clinical factors associated with the outcome were analyzed by Poisson regression. The sample consisted of 105 high-caries-risk children with a mean age of 8.3 (± 2.4) years. From a total of 365 active enamel carious lesions, most lesions (84.1%) were active non-cavitated carious lesions (ICDAS scores 1 and 2) and only 15.9% presented localized enamel breakdown (ICDAS score 3). Of these, 72.6% were inactivated and 92.1% did not progress (mean time of 6.5 ± 4.1 months). The prevalence of controlled carious lesions was higher among children older than 6 years (PR:1.43; 95%CI:1.00-2.03; p = 0.04) and in those with better biofilm control (PR:0.99; 95%CI: 0.98-0.99; p = 0.03). Non-operative approaches are effective for controlling active enamel carious lesions. The majority of active enamel carious lesions became inactive and did not progress after treatment. Caries control was associated with older children and better biofilm control.

Effectiveness of non-operative approaches in active enamel carious lesions: a retrospective longitudinal study

Abstract The aim of the study was to investigate the effectiveness of non-invasive and micro-invasive treatments in active enamel carious lesions in high-caries-risk children. Clinical records of children treated in a dental school setting were retrospectively screened for active enamel carious lesions treated non-invasively (topical fluoride applications, oral hygiene instruction, or dietary guidance) or micro-invasively (sealant). The control of active carious lesions was set as the main outcome established by the combination of inactivation and non-progression of the lesions based on Nyvad and ICDAS criteria, respectively. Individual and clinical factors associated with the outcome were analyzed by Poisson regression. The sample consisted of 105 high-caries-risk children with a mean age of 8.3 (± 2.4) years. From a total of 365 active enamel carious lesions, most lesions (84.1%) were active non-cavitated carious lesions (ICDAS scores 1 and 2) and only 15.9% presented localized enamel breakdown (ICDAS score 3). Of these, 72.6% were inactivated and 92.1% did not progress (mean time of 6.5 ± 4.1 months). The prevalence of controlled carious lesions was higher among children older than 6 years (PR:1.43; 95%CI:1.00-2.03; p = 0.04) and in those with better biofilm control (PR:0.99; 95%CI: 0.98-0.99; p = 0.03). Non-operative approaches are effective for controlling active enamel carious lesions. The majority of active enamel carious lesions became inactive and did not progress after treatment. Caries control was associated with older children and better biofilm control.

Percepção de uso e preparo químico mecânico realizado com diferentes instrumentos endodônticos por estudantes de graduação em Odontologia: uma revisão sistemática de estudos laboratoriais / Undergraduate dental students' use perception of different endodontic instruments for mechanical­chemical preparation: a systematic review of laboratory studies

O estudo revisou a literatura existente com o objetivo de comparar a percepção de uso, qualidade e tempo do preparo químico mecânico de canais radiculares realizado por estudantes de graduação em Odontologia com instrumentos de níquel-titânio (NiTi) e aço inoxidável. Para isso, as bases de dados eletrônicas PubMed, LILACS, Scopus, Embase,SciELOe CENTRALforam acessadas para verificar e selecionar estudos relacionados com a questão de pesquisa publicados até janeiro de 2021. Estudos laboratoriaisque compararam o uso de instrumentos de NiTi com aço inoxidável por alunos de graduação em Odontologia foram avaliados. Dois revisores independentemente selecionaram os estudos, coletaram os dados e analisaram o risco de viés.Dos 92 estudos potencialmente relevantes, 10 atenderam aos critérios de inclusão para análise de texto completo e, posteriormente, incluídos na revisão sistemática. O risco de viés foi considerado alto em todos os estudos. Instrumentos de NiTi apresentarammaior preferência e melhor percepção por estudantes de graduação em Odontologia, menor tempo e melhor qualidade do preparo químico mecânico, commenor ocorrência de acidentes como degraus, transporte e desvios de canal, apesar de estarem associados à maior ocorrência de fratura de instrumentos (AU).

This literature review aimed to compare undergraduate dental students' perceptions regarding the use of nickel­titanium (NiTi) and stainless steel instruments for the mechanical-chemical preparation of root canals, focusing on quality and time. PubMed, LILACS, Scopus, Embase, SciELO,and CENTRAL electronic databaseswere accessed to verify and select related studies published as of January 2021. Laboratory studies comparing the use of NiTi instruments with stainless steel instruments by undergraduate dental students were evaluated. Two reviewers independently selected the studies, collected the data, and analyzed the risk of bias. Out of the 92 potentially relevant studies, 10 met the inclusion criteria for a full-text analysis and were subsequently included in the systematic review. The risk of bias was considered high in all studies. Undergraduate dental students demonstrated a greater preference for and better perception of NiTi instruments. NiTi instruments also resulted in less time for and better qualityof the mechanical-chemical preparation. These were associated with a lower incidence of accidents, such as canal ledges, transportations, and deviations, as well as a higher incidence of instrument fractures (AU).

Caries progression and need for reintervention on occlusal ICDAS 4 lesions after different treatments: a retrospective university-based study / Progressão de cárie e necessidade de reintervenção em lesões oclusais ICDAS 4 após diferentes tratamentos: um estudo retrospectivo de base universitária

Objective: To assess the caries progression and the need for reintervention on occlusal ICDAS 4 lesions after different treatments. Material and Methods: The sample consisted of records of children treated in a public setting who had at least an occlusal ICDAS 4 lesion in primary and/or permanent molars. The radiographic images of ICDAS 4 lesions at the first and last appointments were classified as absence of radiolucency, radiolucent image at the enamel­dentin junction, at the outer half or inner of the dentin. The need for retreatment after different treatments (non-invasive - topical fluoride applications, oral hygiene instructions and dietary guidance, micro-invasive - resin-based sealant, or invasive - restoration) was assessed by reviewing clinical and radiographic records. The need for retreatment was defined as any complication requiring mending (e.g., caries progression, total loss of sealant, or restoration failure). The Poisson regression model was used to investigate the association between individual and tooth-related variables and the outcome. Results: Among the 111 lesions in 81 patients, most (73.0%) lesions were in primary molars. Most lesions (52.3%) did not exhibit radiolucency, whereas 29.7% had radiolucency at the outer half of the dentin. The mean follow-up was 18.8 ± 6.5 months. After follow-up, 82.9% of the lesions did not require retreatment. The prevalence of ICDAS 4 lesions that did not need retreatment was higher among lesions with radiolucency at dentin (p=0.01). Conclusion: Most occlusal ICDAS 4 lesions did not require reintervention, especially those exhibiting radiolucency in the outer half of the dentin (AU)

Objetivo: Avaliar a progressão de cárie e a necessidade de reintervenção em lesões oclusais ICDAS 4 após diferentes tratamentos. Material e Métodos: A amostra consistiu de prontuários de crianças atendidas em ambiente público que apresentavam pelo menos uma lesão oclusal ICDAS 4 em molares decíduos e/ou permanentes. As imagens radiográficas de lesões ICDAS 4 na primeira e última consultas foram classificadas como ausência de radiolucidez, imagem radiolúcida na junção esmalte-dentina, em metade externa ou interna da dentina. A necessidade de retratamento após diferentes tratamentos (não invasivo ­ aplicações tópicas de flúor, orientações de higiene e dieta, micro-invasivo ­ selante resinoso ou invasivo ­ restauração) foi avaliada por meio da revisão dos registros clínicos e radiográficos. A necessidade de retratamento foi definida como qualquer complicação que requer intervenção (por exemplo, progressão da lesão, perda total do selante ou falha na restauração). O modelo de regressão de Poisson foi utilizado para investigar a associação entre as variáveis individuais e dentárias e o desfecho. Resultados: Entre as 111 lesões em 81 pacientes, a maioria (73,0%) das lesões eram em molares decíduos. A maioria das lesões (52,3%) não exibiu radiolucidez, enquanto que 29,7% apresentaram radiolucidez em metade externa de dentina. O tempo de acompanhamento médio foi de 18,8 ± 6,5 meses. Após o acompanhamento, 82,9% das lesões não necessitaram de retratamento. A prevalência de lesões ICDAS 4 que não necessitaram de retratamento foi maior entre as lesões com radiolucidez em dentina (p=0,01). Conclusão: A maioria das lesões oclusais ICDAS 4 não requerem reintervenção, especialmente aquelas que exibem radiolucidez em metade externa da dentina.(AU)

Does use of silane-containing universal adhesive eliminate the need for silane application in direct composite repair?

This in vitro study aimed to evaluate the effect of a silane-containing universal adhesive used with or without a silane agent on the repair bond strength between aged and new composites. Forty nanohybrid composite resin blocks were stored in distilled water for 14 d and thermo-cycled. Sandpaper ground, etched, and rinsed speciments were randomly assigned into four experimental groups: silane + two-step etch-and-rinse adhesive system, two-step etch-and-rinse adhesive system, silane + silane-containing universal adhesive system, and silane-containing universal adhesive system. Blocks were repaired using the same composite. After 24 h of water storage, the blocks were sectioned and bonded sticks were submitted to microtensile testing. Ten unaged, non-repaired composite blocks were used as a reference group to evaluate the cohesive strength of the composite. Two-way ANOVA and Tukey's tests were used to analyze average µTBS. One-way ANOVA and Dunnet post-hoc tests were used to compare the cohesive strength values and bond strength obtained in the repaired groups (α = 0.05). The µTBS values were higher for the silane-containing universal adhesive compared to the two-step etch-and-rinse adhesive system (p = 0.002). Silane application improved the repair bond strength (p = 0.03). The repair bond strength ranged from 39.3 to 65.8% of the cohesive strength of the reference group. Using universal silane-containing adhesive improved the repair bond strength of composite resin compared to two-step etch-and-rinse adhesive. However, it still required prior application of a silane agent for best direct composite resin repair outcomes.

Does use of silane-containing universal adhesive eliminate the need for silane application in direct composite repair?

Abstract This in vitro study aimed to evaluate the effect of a silane-containing universal adhesive used with or without a silane agent on the repair bond strength between aged and new composites. Forty nanohybrid composite resin blocks were stored in distilled water for 14 d and thermo-cycled. Sandpaper ground, etched, and rinsed speciments were randomly assigned into four experimental groups: silane + two-step etch-and-rinse adhesive system, two-step etch-and-rinse adhesive system, silane + silane-containing universal adhesive system, and silane-containing universal adhesive system. Blocks were repaired using the same composite. After 24 h of water storage, the blocks were sectioned and bonded sticks were submitted to microtensile testing. Ten unaged, non-repaired composite blocks were used as a reference group to evaluate the cohesive strength of the composite. Two-way ANOVA and Tukey's tests were used to analyze average µTBS. One-way ANOVA and Dunnet post-hoc tests were used to compare the cohesive strength values and bond strength obtained in the repaired groups (α = 0.05). The µTBS values were higher for the silane-containing universal adhesive compared to the two-step etch-and-rinse adhesive system (p = 0.002). Silane application improved the repair bond strength (p = 0.03). The repair bond strength ranged from 39.3 to 65.8% of the cohesive strength of the reference group. Using universal silane-containing adhesive improved the repair bond strength of composite resin compared to two-step etch-and-rinse adhesive. However, it still required prior application of a silane agent for best direct composite resin repair outcomes.

How does hydrofluoric acid etching affect the cyclic load-to-failure of lithium disilicate restorations?

This study investigated the effect of etching with distinct hydrofluoric (HF) acid concentrations on the cyclic load-to-failure (CLf) of simplified lithium disilicate glass-ceramic restorations adhesively cemented to a dentin analogue (n = 20): non-etched/control (CTRL), or etched for 20 s with HF acid at 3% (HF3), 5% (HF5), or 10% (HF10). A silane coating was then applied onto the ceramic surfaces. Fatigue tests followed the staircase approach (initial load= 720 N; step-size= 70 N; 500,000 cycles per sample; 20 Hz) using a hemispheric stainless-steel piston (Ø= 40 mm) under water. The CLf data were analyzed using Dixon and Mood method. Topographic and fractographic analyses were conducted. CLf (in N) of HF3 (1355 ±â€¯32.0) and HF5 (1335 ±â€¯58.8) groups were the highest and statistically similar; HF10 presented intermediate CLf (1175 ±â€¯132.9), while the non-etched group had the lowest one (965 ±â€¯145.0). Topographical analysis showed that the higher the HF acid concentration, the more pronounced the topographical changes. All failures (radial cracks) started from the inner surface of the ceramic discs. Topographical changes promoted by intermediate HF acid concentrations (3% and 5%) may improve fatigue performance for adhesively-cemented lithium disilicate restorations.

Fatigue failure load of an adhesively-cemented lithium disilicate glass-ceramic: Conventional ceramic etching vs etch & prime one-step primer.

OBJECTIVES: To evaluate the effect of different glass-ceramic surface treatments and aging on the fatigue failure load of a lithium disilicate glass-ceramic adhesively cemented to a dentin analogue material. METHODS: One hundred and twenty (120) disc-shaped lithium disilicate specimens (Ø=10mm, thickness=1.5mm) were produced and randomly allocated (n=20) into 6 groups, considering 2 study factors: "surface treatment" in 3 levels (SIL-silane application only; HF5+SIL-5% hydrofluoric acid etching and silane application; ME&P-etching with an one-step ceramic primer), and "storage" in 2 levels (baseline-storage for 7 days; aging-storage for 90 days+12,000 thermal cycles). Ceramic discs were adhesively cemented to discs of a dentin analogue material (Ø=10mm, thickness=2.0mm) following the manufacturers' instructions. The fatigue failure load was determined by the staircase approach (250,000 cycles; 20Hz; initial load=1050N [∼70% of mean load-to-failure]; step size=52.5N [5% of initial load]). Micro-morphologic, fractographic, and atomic force microscope analysis were also performed. Fatigue failure load data were evaluated by one-way ANOVA, Bonferroni and t-tests for independent samples. RESULTS: HF5+SIL presented higher fatigue failure load in both conditions (baseline and aging); ME&P presented intermediary mean values, while the SIL group presented the worst performance. All groups had a statistically significant decrease in the fatigue performance after aging. SIGNIFICANCE: Hydrofluoric acid followed by silane application showed the best fatigue performance for an adhesively-cemented lithium disilicate ceramic. Aging negatively influenced the fatigue performance for all tested groups.

Are self-etch adhesive systems effective in the retention of occlusal sealants? A systematic review and meta-analysis.

BACKGROUND: Occlusal sealants are an effective method for caries prevention, although the effectiveness of different application strategies has not been established yet. AIM: This systematic review compared the retention rate of sealants placed on occlusal surfaces following the use of self-etch adhesive systems and traditional acid etching, with or without the application of adhesive system. DESIGN: Literature searching was carried out until June 2015 in PubMed/MEDLINE, CENTRAL, and ClinicalTrials databases selecting randomized clinical trials that evaluated self-etch adhesive systems associated with pit and fissure sealants in primary or permanent molars comprising retention as outcome. From 683 potentially eligible studies, 10 were selected for full-text analysis and 5 were included in the meta-analysis. Two reviewers independently selected the studies, extracted the data, and assessed the bias risk. Pooled-effect estimates were obtained by comparing the retention failure rate between groups (self-etch systems vs acid etching with or without adhesive systems). RESULTS: Significant difference was found between groups, favoring the control group (prior acid etching) (P < 0.05), which showed lower failure rate in the retention of occlusal sealants. High heterogeneity was found on the meta-analysis. Most trials showed good evidence strength. CONCLUSIONS: Occlusal sealants applied with self-etch systems show lower retention throughout time than sealants applied in the conventional approach, regardless of the use of adhesive systems.